Troubleshooting and bug reports - SpaceEngine 0.990

chawlanikhil · 28 Feb 2025 14:23

Space engine is crashing after clicking on exe file. It says initialising Open GL and than crashes. I am running it on HP Omnibook X Laptop 14, with processor - Snapdragon(TM) X Elite - X1E78100 - Qualcomm(TM) Oryon(TM) CPU 3.42 GHz, installed RAM 16 GB, 64 bit OS , ARM based processor With Windows 11.

Please suggest if i can run Space engine on my System and what are the possible ways to do it. This is for my Kid

Thanks and regards

01 Mar 2025 03:01

Space engine is crashing after clicking on exe file. It says initialising Open GL and than crashes. I am running it on HP Omnibook X Laptop 14, with processor - Snapdragon(TM) X Elite - X1E78100 - Qualcomm(TM) Oryon(TM) CPU 3.42 GHz, installed RAM 16 GB, 64 bit OS , ARM based processor With Windows 11.

Please suggest if i can run Space engine on my System and what are the possible ways to do it. This is for my Kid

Thanks and regards

Hi. From what I can see online, your laptop has an integrated graphics Qualcomm Adreno processor. I'm afraid these graphics processors are not compatible with SpaceEngine. Can you upload your se.log file that you can find in your SpaceEngine \system folder?

reiroseantoni26 · 15 Mar 2025 06:25

hello i have a problem , my eyes are hurting

this is my record vid "https://drive.google.com/drive/folders/ ... sp=sharing"

24 Mar 2025 05:20

hello i have a problem , my eyes are hurting

this is my record vid "https://drive.google.com/drive/folders/ ... sp=sharing"

The log looks partial or damaged, but your SpaceEngine version is rather old. Update your GOG version to the latest one, and try and update your notebook graphics drivers to the latest version available, those are apparently from August 2024.

Cookie · 29 Mar 2025 08:19

every time when i spawn most of the spaceships they're either invisible either when i move with them the get teleported to sun and their stats break

02 Apr 2025 11:41

every time when i spawn most of the spaceships they're either invisible either when i move with them the get teleported to sun and their stats break

Try and delete your save-user.cfg and spacecraft.cfg from your SpaceEngine config folder. If that doesn't solve the issue, and the problem it's happening with ships specifically into the solar system, it's also possible that one of the many addons you have installed is changing some parameters related to Earth or the Sun and it's causing this. There is no clear indication of such issue in the log, but I would suggest to try and disable the addons from Steam with the "Workshop configuration and uploading tool", to see which one could be responsible for that.

: LaunchConfigTool.png (62.47 KiB) Viewed 1469 times

mattdiction · 10 May 2025 05:51

I'm having an issue with planet textures failing to load after having explored celestial bodies in the solar system. After exploring a few planets within the solar system, the surfaces of every celestial body becomes lower quality, and then fails to load entirely. Their surfaces become pitch black and only their atmospheres are visible. This does not happen if I exclusively only explore outside of the solar system, but I want to be able to look at the solar system.

I've looked around online for solutions but I haven't found any.
I have had this issue for a long while now. It's been really annoying. In the past I've reinstalled SE, cleared the cache, and just recently I've updated my drivers again, but none of that fixed the problem. What am I missing?

NVIDIA GeForce RTX 3070 Ti
Windows 11
13th Gen Intel Core i5-13600k (20 CPUs), ~3.5GHz
32 GB ram, 8 GB VRAM

I don't understand why this is still happening

Sheliak · 26 May 2025 07:25

Hi to everyone, I have found a strange behavior when I'm in fisheye view mode (and, to some extent, also in cylindrical and cubemap modes). When I click with the mouse on an object (star, planet, indifferently), the software does not select the object below the cursor, but instead it selects another object in another part of the screen (or outside the screen). The object selected is not random, because if I click the same point, the software reacts selecting always the same object, but apparently without a correlation with the point on the screen where I really clicked. The problem there is also in cudemap, cylindrical and even perspective view, but this last only at very high FOVs: I also have found the same exact problem on different PCs, the only things they have in common is the operating system (Windows in both case, 10 and 11). Someone else has seen the same problem? Do you think there is a solution?

Thank you very much.

27 May 2025 12:13

When in fisheye mode and other warping modes, SpaceEngine takes the position of your mouse as if it was in perspective mode and applies chosen display transformations to its coordinates as well, then it selects the nearest selectable object. That's how the program operates those modes.

Sheliak · 28 May 2025 10:03

Thank you for your answer, but it's not the behavior I see when I'm using fisheye mode. I'll try to post a screenshot: in these image, we have Jupiter in the center of image and Orion just below. I have clicked directly on jupiter: Space Engine instead has selected a star in the lower-right zone, near the lens flare.
[removed code for image]
I have tried to do the same in perspective view, even at the maximun FOV, but it selects the right bodies, Jupiter. Why selecting a body in the middle of the FOV should result in selecting a body near the edge or (in some cases) even outside of FOV? I'm puzzled, it's not logic...

Sheliak · 28 May 2025 10:09

Sorry, for the mess of the post above...
This should be the right image

SE09972 · 26 Jun 2025 05:55

I StartUp the SpaceEngine 0.990 But Problems:
The Game would be crashed i need help to reduce crash this game

My Gpu is Vega 3
Cpu: Athlon 200ge
Ram: 8gb

26 Jun 2025 07:59

I StartUp the SpaceEngine 0.990 But Problems:
The Game would be crashed i need help to reduce crash this game

My Gpu is Vega 3
Cpu: Athlon 200ge
Ram: 8gb

I'm afraid your integrated graphics chipset could be the issue, as it's not within range of hardware specifications for the program. You could try and keep your graphics drivers updated and SE graphics quality to low, but crashes are a sign that your computer can't keep up with software requests.

Ananel · 13 Sep 2025 06:40

Hello.
Since I bought Space Engine in December 2024, I was disappointed because it has a lot of issues on my computer and I don't know why.
After about 5 minutes of play, some planets and stars stop rendering. Sometimes the surface is just blurry, sometimes it has a wrong surface, sometimes it's just entirely black.
I thought at first it was because my GT 1030 was below minimal requirements and had only 2 GB of VRAM, but some months ago I upgraded to a GTX 1080 with 8 GB of VRAM and I'm now able to play with decent graphics, but the issue mentionned before still persists. My VRAM is at 6GB used when I'm playing.
The issue is fixed when I restart Space Engine, but it doesn't last more than 5 minutes.

Here's some examples:

I believe my PC is able to run Space Engine without any issues, it is the only game where I have issues like this. Here are my specs:
CPU: i5-4590
GPU: GTX 1080
RAM: 24 GB DDR3 1333 MHz
Windows 10
And the game runs on a SSD

If you have any solution to get rid of these issues, that would be very nice because it's been several months without knowing where the issue comes from.

SE09972 · 26 Sep 2025 23:52

HELPP
The planet is a terra with life but dosent exists in habitable zone whyy
ther no vegetation after created this planet with marine/terrestrial
terrestrial life terrain is dosen't exist how to fix!
https://drive.google.com/file/d/1J11xjgzqPQ1f5bxlY5PrjyDAW65FLshp/view?usp=sharing

Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Re: Troubleshooting and bug reports - SpaceEngine 0.990

Who is online